Guild of Writers

Revision as of 14:23, 19 June 2009

What needs to be done in the code?

Instructions

If you have any changes to PyPRP that are not in the trunk yet, but you would like to have in the release, please add them to this list, along with a rough estimate of how many weeks it will take you to get it done. Include just the development work in the estimate, not documentation - that will come in a later step. Break independent features down into separate entries as far as possible, and indicate dependencies.

What I imagine to see in this list are finished features from branches that only need to be merged to the trunk, small clean-up work, things that can be brought into beta quality with a small amount of testing, etc. Not big things that haven't even been started yet, that are considered experimental, or that would take a lot of development effort. This is not a wish list, an entry is only made by the person who is willing and able to complete it in the course of a few weeks. I imagine that the list should turn out fairly short, because most things waiting to be released are in the trunk already.

If you are not sure whether your modifications should be integrated into the release or not and would like to discuss this, please indicate so. I personally don't feel qualified to judge the release-worthiness of new features on my own and I hope in such cases a decision can be reached by peer-review from Plasma experts.

Also, if you know about anything that is in the trunk, but should not stay there (because it is unfinished and breaks something, or for whatever reason), please list that here too.

- Christian walther

List - add your entries here

• Feature: Application of modifiers on export merged in r387

  By: CWalther

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Bugfix: Don't read the whole file into memory when using an hsStream in read mode merged in r388

  By: CWalther

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Bugfix: Revision 380 - QuickScript_SoundRegion: multiplayer sync issue merged in r389

  By: D'Lanor

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: Advanced AlcScript properties for DrawableSpans merged in r392

  By: Paradox

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: plExcludeRegionModifier

  By: GPNMilano

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: plMaintainersMarkerModifier

  By: GPNMilano

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: plResponderEnableMsg

  By: GPNMilano

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: Advanced AlcScript properties for Sound Classes

  By: GPNMilano

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: plEAXListenerMod

  By: GPNMilano

  Estimated time: 2 weeks (but ready to merge)

  Depends on: documentation needed for the individual settings

  Needs discussion: could be implemented to call from a specific list to set the settings rather than setting it all by alcscript. Must also be attached to the soft volume export code as it needs to be attached to a soft volume scene object to work properly

• Feature: PRP_MatClasses

  By: GPNMilano

  Estimated time: 0 weeks (ready to merge)

  Depends on: full documentation needed for all the new settings and changes

  Needs discussion: an age whose materials are not changed will export fine, but the materials will be bright and shiny compared to how they were in previous versions, as well as several mapto changes

• Bugfix: Revision 385 - Dynamic environment map coordinates merged in r390

  By: CWalther

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

• Feature: Single-package distribution

  By: CWalther

  Estimated time: 1 week

  Depends on: nothing

  Needs discussion: yes - here

• Bugfix: Change behavior of texture ofs and size to match Blender

  By: tikibear

  Needs discussion: yes - here

• Feature: Kickables can have user-defined collision geometry merged in r417

  By: Robert The Rebuilder

  Estimated time: 0 weeks (ready to merge)

  Depends on: nothing

  Needs discussion: no

Compiling a What's New List and Documentation

Instructions

Below is a list of changes in the trunk since the 1.5 release, gathered from Subversion. Please review and flesh out the entries about your changes according to the following guidelines. The main part of this step consists of writing documentation for all the new and changed features. When everything is done, I will transform this into the official "What's New" list to be included in the release (and displayed on its own wiki page).

• Description: Write a one-line, end-user-readable description that captures the essence of the change here, or confirm the preliminary one that I have cooked up from the SVN log and superficial review of the code change.

• Category: I have tried to roughly categorize the changes into new features ("Feature"), changes to existing features ("Change"), and bugfixes ("Fix"), in order to group the final list into these categories. Choose one category and if necessary correct the one I have tentatively chosen.

• Detail/Documentation Link: If your change or new feature needs a more detailed description than provided in the Description column, or documentation on how to use (reference or tutorial style), write that documentation here on the wiki and place a link to it in this column. For short pieces of documentation, you may insert a subsection into this document under Details below (see examples about renormal and modifier application). This section will be moved to its own page in the end. For longer explanations, start a new article. You may also link to an existing article, provided that you make sure it is up to date with respect to the changed feature. If you feel you are unable to adequately document your changes within a few weeks or would like assistance with it, please state so in the release discussion thread on the forum as soon as possible, so that we can find someone else to do it. Of course, being still available to assist the documenter with a basic introduction and answers to questions would be helpful in that case.

• Changes Existing Age: For changes and new features (there is probably little point to it if the previous behavior was a bug), indicate here whether the change affects how an existing age exports, compared to PyPRP 1.5, and if so describe how. If the age does export differently, but it is possible to restore the way it exported in 1.5 by making changes to the Blender file, indicate so in the How to Convert column. If these modifications are mechanical enough, we might provide scripts that perform them under PyPRP Wizards. In addition to being useful to the end user, the total information collected in these columns will serve as a basis for the decision whether to call the release "1.6" or "2.0".

• Revision: This column is only here for your reference and will not end up in the released product. The first number is the revision(s) in which the change ended up in the trunk, in parentheses the revision(s) in which it was initially committed to a branch.

• If you consider any of your changes not newsworthy, you may remove the row from the list. You may also combine multiple rows into one or split single rows into several as you see fit.

• Once you're done with an entry in the list, including completed documentation, enter "yes" into the Done column. If the list entry is completed, including documentation link, but the documentation article/section itself is not finished yet, you may enter "documenting" into the Done column to indicate that you're working on it, but that is not required.

Hope that is enough explanation to allow us to get this done in an orderly manner. Questions and suggestions are welcome as usual.

- Christian walther

List

Details

Normal Recomputation

By default, exporting the mesh shown at the bottom of the image results in the look at the top right of the image: the large faces of the cube are shaded as if they were strongly curved. Enabling normal recomputation on an object, on the other hand, results in the look at the top left, much improving the appearance of objects that are supposed to have large flat faces and rounded edges (simulated by narrow bevel faces).

To enable this feature on an object, either add a logic property to the object of type String, named renormal, with value areaweighted, as shown here,

or set the visual.renormal property to areaweighted in AlcScript:

MyObject:
    visual:
        renormal: areaweighted

Background: To compute the vertex normals that are then exported by PyPRP and control the shading in Uru, Blender takes the average of the (real) normals of all adjacent faces of the vertex. This is what is shown at the bottom right of the image. In some situations, choosing different normals, as shown at the bottom left of the image, leads to better results. Unfortunately, Blender doesn't allow the user to modify the vertex normals, it just computes them using its fixed average rule. Therefore, the only way to achieve normals as on the left side is to do it in the export plugin which is free to export different normals than Blender tells it to. This is what PyPRP does when the renormal property is set. When set to areaweighted (the only currently implemented option), it averages the normals of the adjacent faces of a vertex as well, but weighted by the face area. This has the effect that large faces have a strong influence on the vertex normals, pulling them towards their real surface normals and therefore appearing flatter, while small faces have little influence and appear more curved.

Export with Modifiers Applied

In the past, if you had associated modifiers to your Blender meshes, PyPRP would ignore them and still export the unmodified mesh. To have modifiers applied, you needed to save the document, choose Apply on each modifier to bake it into the mesh, export, and revert to the saved state to get the nondestructive modifiers back. Now, PyPRP does that for you – for all objects that have modifiers, the modified mesh is exported.

Examples of useful modifiers are EdgeSplit to get sharp edges and Array for repeated objects. Keep in mind however that many modifiers make the mesh more complex and thereby reduce performance in Uru, just as if you had modeled the more complex mesh by hand. In particular, the Subsurf modifier can generate a very large number of faces, so don't go overboard with it, as tempting as it may seem to smooth your objects.

Multiple footstep sounds not appended conform specs

Supposed to make a single footstep region trigger multiple footstep sounds, although I am not sure why anyone would want that. According to the comment in the code (the "specs" mentioned) this should be done by appending "each command after the first". The old version did not do that. For every surface in the list it wrote: "append: false". The new version writes "append: true" except for the first surface, but this makes no difference. Still only the first footstep sound plays.

Lightmaps

From PM by Nadnerb to Christian: It is possible to flag a layer as being part of a lightmap. (In blender, this is done by pressing the "Amb" button in the material "Map To" panel) When cyan uses lightmaps, these layers are placed in the "piggybacks" list, rather than in the main layers list. (see "Material #350_Inwall_LIGHTMAPGEN" in "Ahnonay_District_LinkRoom") This change duplicates that behavior. This does change the behavior of the plugin, but I don't know if anyone actually flags their lightmap layers. I believe that doing this allows the lightmap layer to be "treated as light". (meaning it is multiplied with the base, but real-time light is added to it)